AKD4160-A Datasheet, PDF (7/37 Pages) Asahi Kasei Microsystems – Evaluation board Rev.0 for AK4160

[AKD4160-A]
CONTROL SOFTWARE MANUAL
■ Evaluation Board and Control Soft Settings
1. Set an evaluation board properly.
2. Connect PORT1 (Control Port) with a PC by the USB box packed with the AKD4160. (Please install the driver in
the CD-ROM when using this control software is used on Windows 2000/XP/Vista. Please refer “Installation
Manual of Control Software Driver by AKM device control software”. In case of running on Windows95/98/ME,
the driver install is not needed. In case of Windows Vista/7, open the property of the control soft, and set the
compatibility to “Windows XP”. This control software does not operate on Windows NT.)
3. Continue to evaluation by following steps.
■ Operation Screen
1. Start up the control program, and the operation screen is shown below.
<KM104501>
Figure 5. Operation Screen of Control Soft
-7-
2010/11