AK4186EN-A Datasheet, PDF (6/24 Pages) Asahi Kasei Microsystems – Evaluation board

■ Other jumper pins set up
Main Board
[JP1] Analog ground and Digital ground
OPEN: Separated.
SHORT: Common. (The connector “DGND” can be open.) <Default>
[JP6] (AIN-P): Selection of AIN-P
EXTXP: AIN-P signal is input to XP/BR pin.
EXTYP: AIN-P signal is input to YP/TR pin.
EXTIN: AIN-P signal is input to IN/WIPER pin. <Default>
[JP7] (AIN-N): Selection of AIN-N
EXTXN: AIN-N signal is input to XN/TL pin. <Default>
EXTYN: AIN-N signal is input to YN/BL pin.
[JP8] (CAD0): Selection of CAD0
OPEN: Select CAD0 pin to “H” (CAD0 bit = “1”).
SHORT: Select CAD0 pin to “L” (CAD0 bit = “0”). <Default>
[AKD4186EN-A]
<KM096300>
-6-
2009/2