AKD5354 Datasheet, PDF (5/18 Pages) Asahi Kasei Microsystems – EVALUATION BOARD REV.A FOR AK5354

ASAHI KASEI
[AKD5354]
2. Control Software Manual
n Set-up of evaluation board and control software
1. Set up the AKD5354 according to previous term.
2. Connect IBM-AT compatible PC with AKD5354 by 10-line type flat cable (packed with AKD5354). Take care of the
direction of 10pin header. (This control software does not operate on Windows NT, therefore please operate it on
Windows95/98.)
3. Insert the floppy-disk labeled “AKD5354 Control Program ver 1.0” into the floppy-disk drive.
4. Access the floppy-disk drive and double-click the icon of “akd5354.exe” to set up the control program.
5. Then please evaluate according to the follows.
n Explanation of each buttons
1. [Port Setup] :
2. [Write default] :
3. [Function1] :
4. [Function2] :
5. [Write] :
Set up the printer port.
Initialize the register of AK5354.
Dialog to write data by keyboard operation.
Dialog to evaluate IPGA.
Dialog to write data by mouse operation.
Note : It is necessary to MCLK=256fs and I²S for audio data format in the beginning.
Because AK4353 is fixed to MCLK=256fs and I²S for audio data format.
<KM062600>
-5-
’00/06