AKD4392-SB Datasheet, PDF (5/32 Pages) Asahi Kasei Microsystems – AK4392 Sound quality evaluation board Rev.0

[AKD4392-SB]
Control Software Manual
„ Evaluation Board and Control Soft Settings
1.Set an evaluation board properly.
2.Connect the evaluation board to an IBM PC/AT compatible PC by a 10wire flat cable. Be aware of
the direction of the 10pin header. When running this control soft on the Windows 2000/XP, the
driver which is included in the CD must be installed. Refer to the “Driver Control Install Manual for
AKM Device Control Software” for installing the driver. When running this control soft on the
windows 95/98/ME, driver installing is not necessary. This control soft does not support the
Windows NT.
3.Proceed evaluation by following the process below.
<KM099800>
5
2009/06