AKD4367 Datasheet, PDF (5/24 Pages) Asahi Kasei Microsystems – Evaluation board Rev.B for AK4367

ASAHI KASEI
[AKD4367]
n The function of the toggle SW
Upper-side is “H” and lower-side is “L”.
[SW1] (DAC_PDN) : Resets the AK4367. Keep “H” during normal operation.
[SW2] (DIR_PDN) : Resets the AK4116. Keep “H” during normal operation.
n Indication for LED
[LED1] (ERF): Monitor INT0 pin of the AK4116. LED turns on when unlock or parity error occurs.
n Serial Control
The AK4367 can be controlled via the printer port (parallel port) of IBM-AT compatible PC. Connect PORT2
(uP-I/F) with PC by 10 wire flat cable packed with the AKD4367.
Connect
CSN
CCLK
PC
CDTI ^AKD4367
CDTO
10 wire
10pin
flat cable Connector
10pin Header
Figure 2. Connection of 10 wire flat cable
<KM071300>
-5-
2003/03