AKD5366_07 Datasheet, PDF (3/32 Pages) Asahi Kasei Microsystems – digital audio 24bit 48kHz A/D converter,

[AKD5366]
(2) Master Mode
(2-1) A/D evaluation using DIT function of AK4103
PORT1 (DIT) is used. DIT generates audio bi-phase signal from received data and which is output through
optical connector (TOTX176). It is possible to connect AKM’s D/A converter evaluation boards on the
digital-amplifier which equips DIR input. Nothing should be connected to PORT2 (ROM). In case of using
external clock through a BNC connector (J13), select EXT on JP8 (CLK) and short JP6 (XTE) and open JP9
(EXT).
JP2
JP4
JP6
JP8
JP9
LRCK
BICK
XTE
CLK
EXT
Other jumper pins set up
1. JP1 (GND) : Analog ground and Digital ground
OPEN : Separated.
SHORT : Common. (The connector “DGND” can be open.) <Default>
2. JP3 (M/S) : Select Master/Slave mode for AK5366
SLAVE : Slave mode <Default>
MASTER : Master mode
3. JP5 (TVDD) : Select DVDD for AK5366
REG : Supply from regulator
TVDD : Supply from TVDD connector <Default>
4. JP7 (MCLK) : MCLK Frequency for 74HC4040
256 : MCLK is 256fs. (=12.288MHz@fs=48kHz) <Default>
512 : MCLK is 512fs. (=24.576MHz@fs=48kHz)
<KM073601>
-3-
2007/04