AKD4629-A Datasheet, PDF (3/68 Pages) Asahi Kasei Microsystems – Evaluation board Rev.1 for AK4629

„ Control mode
(1) Parallel control mode <Default>
(1-1) Set up Parallel/Serial select pin
Set up SW2-6 (PS) to “H”. (See Table 3)
(1-2) Set up the jumper pins
JP61
SEL1
JP63
SEL2
JP62
SEL3
CSN DIF0 SCL/CCLK DIF1
SDA/CDTI TDM0
(2) Serial control mode
(1-1) Set up Parallel/Serial select pin
Set up SW2-6 (PS) to “L”. (See Table 3)
(1-2) Set up the jumper pins
JP61
SEL1
JP63
SEL2
JP62
SEL3
CSN DIF0 SCL/CCLK DIF1
SDA/CDTI TDM0
[AKD4629-A]
„ Audio I/F evaluation mode
(1) Evaluation of ADC using DIT of AK4118
(1-1) Set up analog inputs
(1-1-1) Evaluation of ADC using DIT of AK4118 when single-ended inputs
PORT2 (DIT) or J2 (BNC_TX) is used. Nothing should be connected to PORT4 (AC3).
Set up SW2-2 (SGL) to H (See Table 3).
Set up the jumper pins.
JP33
LIN1+
JP34
LIN1-
JP37
RIN1+
JP38
RIN1-
Canon RCA Canon GND CanonRCA CanonGND
<KM101901>
-3-
2011/01