AK8150CU Datasheet, PDF (3/6 Pages) Asahi Kasei Microsystems – 1.8V/3.0V Single-PLL Clock Generator

AK8150B
Absolute Maximum Rating
Over operating free-air temperature range unless otherwise noted ⁽¹⁾
Items
Symbol
Ratings
Unit
Supply Voltage
VDD
-0.3 to 4.6
V
Input Voltage
Vin
VSS-0.3 to 3.6
V
Input Current (any pins except supplies)
Storage Temperature
IIN
Tstg
±10
mA
-55 to 130
C
Note
(1) Stress beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device.
These are stress ratings only. Functional operation of the device at these or any other conditions beyond those
indicated under “Recommended Operating Conditions” is not implied. Exposure to absolute-maximum-rating
conditions for extended periods may affect device reliability. Electrical parameters are guaranteed only over the
recommended operating temperature range.
ESD Sensitive Device
This device is manufactured on a CMOS process, therefore, generically susceptible to
damage by excessive static voltage. Failure to observe proper handling and installation
procedures can cause damage. AKM recommends that this device is handled with appropriate
precautions.
Recommended Operation Conditions
Parameter
Operating Temperature
Supply Voltage 1
Supply Voltage 2
Input Clock Frequency
Input Clock Duty Cycle
Output Load Capacitance
Symbol
Conditions
Ta
VDD
VDDO1
VDDO2
Fin
1.8V output
3.0V output
Cp
Pin: 12M, REF
Min
Typ
Max Unit
-20
1.7
1.8
1.7
1.8
2.7
3.0
38.0
50
85
C
1.9
V
1.9
V
3.3
MHz
%
30
pF
MS0678-E-00
-3-
Mar-2011