AK8130B Datasheet, PDF (3/8 Pages) Asahi Kasei Microsystems – Low Power Multiclock Generator with VCXO

The brand name
of AKEMD’s IC’s
AK8130B
Absolute Maximum Rating
Over operating free-air temperature range unless otherwise noted ⁽¹⁾
Items
Symbol
Ratings
Unit
Supply voltage
VDD
-0.3 to 4.6
V
Input voltage
Vin
VSS-0.3 to VDD+0.3
V
Input current (any pins except supplies)
IIN
Storage temperature
Tstg
±10
mA
-55 to 130
°C
Note
(1) Stress beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device.
These are stress ratings only. Functional operation of the device at these or any other conditions beyond those
indicated under “Recommended Operating Conditions” is not implied. Exposure to absolute-maximum-rating
conditions for extended periods may affect device reliability. Electrical parameters are guaranteed only over the
recommended operating temperature range.
ESD Sensitive Device
This device is manufactured on a CMOS process, therefore, generically susceptible to
damage by excessive static voltage. Failure to observe proper handling and
installation procedures can cause damage. AKEMD recommends that this device is handled with
appropriate precautions.
Recommended Operation Conditions
Parameter
Symbol
Conditions
Min
Typ
Max Unit
Operating temperature
Supply voltage ⁽¹⁾
Ta
VDD
-20
85
°C
3.0
3.3
3.6
V
Output Load Capacitance
Cp1 Pin: CLK1-4
Cp2 Pin: REFOUT
15
pF
25
pF
Note:
(1) Power to VDD1, VDD2 and VDD3 requires to be supplied from a single source. A decoupling capacitor of
0.1µF for power supply line should be installed close to each VDD pin.
MS0668-E-02
-3-
Feb-08