AK4250 Datasheet, PDF (3/8 Pages) Asahi Kasei Microsystems – Output Coupling Capacitor-less Video Amp with LPF

ASAHI KASEI
No. Pin Name
1 CP
2 VDD
3 VIN
4 PDN
5 VOUT
6 VSS
7 VEE
8 CN
PIN/FUNCTION
I/O
Function
O ^{Positive Charge Pump Capacitor Terminal Pin}
- Power Supply Pin.
I Composite Video Signal Input Pin
Power-Down Mode Pin. Internal Pull Down 100kΩ.
I
“H”: Power up, “L”: Power down.
O Composite Video Signal Driver Pin
- Ground Pin
O ^{Negative Voltage Output Pin for Video Amplifier}
I ^{Negative Charge Pump Capacitor Terminal Pin}
[AK4250]
ABSOLUTE MAXIMUM RATINGS
(VSS=0V; Note1)
Parameter
Symbol
min
Power Supplies:
VDD
−0.3
Input Current, Any Pin Except Supplies
IIN
-
Input Voltage (Note 2)
VIN
−0.3
Ambient Temperature (powered applied)
Ta
−40
Storage Temperature
Tstg
−65
max
4.0
±10
(VDD+0.3) or 4.0
85
150
Units
V
mA
V
°C
°C
Note 1. All voltages are with respect to ground.
Note 2. VIN, PDIN pins. Max is smaller value between (VDD+0.3)V and 4.0V
VOUT pin becomes Hi-Z at PDN pin = “L”. Therefore VOUT pin is available to signal line from another device
by Wired-OR. The input signal to VOUT pin mustn’t exceeds this input voltage range.
Any voltage must not be applied to the CN pin.
WARNING: Operation at or beyond these limits may result in permanent damage to the device.
Normal operation is not guaranteed at these extremes.
(VSS=0V; Note1)
Parameter
Power Supplies
RECOMMENDED OPERATING CONDITIONS
Symbol
VDD
min
typ
2.7
3.0
Note 1. All voltages with respect to ground.
* AKM assumes no responsibility for the usage beyond the conditions in this datasheet.
max
Units
3.6
V
MS0540-E-00
-3-
2007/03