AKD4705-A Datasheet, PDF (26/42 Pages) Asahi Kasei Microsystems – 2ch DAC with AV SCART switch

ASAHI KASEI
[AKD4705-A]
Revision History
Date
(YY/MM/DD)
05/09/27
06/08/30
Manual Board
Reason
Revision Revision
KM078600 0 First Edition
KM078601 0 Modification
Comment
addition
Modification
Comment
addition
Error Correct
Contents
P1. Title:
Evaluation board Rev.0 for AK4705
AK4705 Evaluation Board Rev.0
P3. 1)-1 DIP switch set-up: Table1
Add (Note) AK4112B: DIF1=“L”
Add “Default ”
P4. Notes 4.
24bit I2S 24bit I2S (Default)
P4. Note3, Note4:
Delete the check mark of MUTE, STBY
P5-P7. JP1 (EXT), JP2 (MCLK), JP3 (BICK), JP4 (SDTI), JP5 (LRCK),
JP7 (GND):
Add “Short”, “Open”, “Default ”
JP6 (RX):
Add “TORX”, “BNC”, “Default ”
JP12 (VCRRC):
Add “I”, “I/O”, “Default ”
P8. DIP-switch (S1) List:
Switch Name: DIF0, Default: OFF ON
Switch Name: DIF2: Default: OFF ON
P8. Jumper List:
No.1: EXT
Short: X’tal (default) Open: X’tal (Default)
Open: External clock via BNC (J1)
Short: External clock via BNC (J1)
No.8: D-A
Open: from the “D-5V” Jack.(default)
Open: from the “D-5V” Jack.
No.12: VCRRC
“I” side: Input to VCRRC from VCRRC jack
“I” side: Input to VCRRC from VCRRC jack (Default)
P25. Figure 2-3. Y/C Crosstalk: Plot Correct
<KM078601>
- 26 -
2006/08