AK4367 Datasheet, PDF (24/38 Pages) Asahi Kasei Microsystems – OUTPUT MIXER & HP - AMP 24 BIT 2 CH DAC

ASAHI KASEI
[AK4367]
„ Serial Control Interface
(1) 3-wire Serial Control Mode (I2C pin = “L”)
Internal registers may be written via to the 3 wire µP interface pins (CSN, CCLK and CDTI). The data on this interface
consists of Chip address (2bits, Fixed to “01”), Read/Write (1bit, Fixed to “1”, Write only), Register address (MSB first,
5bits) and Control data (MSB first, 8bits). Address and data is clocked in on the rising edge of CCLK. For write
operations, data is latched after a low-to-high transition of 16th CCLK. The clock speed of CCLK is 5MHz(max). The
value of internal registers is initialized at PDN pin = “L”.
CSN
CCLK
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
CDTI
C1 C0 R/W A4 A3 A2 A1 A0 D7 D6 D5 D4 D3 D2 D1 D0
C1-C0:
R/W:
A4-A0:
D7-D0:
Chip Address (Fixed to “01”)
READ/WRITE (Fixed to “1”, Write only)
Register Address
Control Data
Figure 20. 3-wire Serial Control I/F Timing
MS0247-E-01
- 24 -
2004/11