AKD4395-SBW Datasheet, PDF (2/30 Pages) Asahi Kasei Microsystems – 192kHz sampling 24Bit ΔΣ DAC

ASAHI KASEI
[AKD4395-SBW]
„ Operation sequence
1) Set up the power supply lines. (See “Other jumpers set-up”.)
Name
Color
Voltage
Comments
Attention
+15V
-15V
AGND
Red
Blue
Black
+12∼+15V
-12∼-15V
0V
Regulator,
Power supply for Op-amp.
Regulator,
Power supply for Op-amp.
GND
This jack is always needed. Power line
This jack is always needed. Power line
This jack is always needed.
Table 1. Set up of power supply lines
Each supply line should be distributed from the power supply unit.
2) Set-up the jumper pins
3) Set-up the DIP switches. (See the followings.)
4) Power on
The AK4395 should be reset once bringing SW1 (PDN) “L” upon power-up.
<KM080300>
2
2005/08