AKD4387-SB Datasheet, PDF (2/26 Pages) Asahi Kasei Microsystems – 192kHz sampling 24Bit DAC

ASAHI KASEI
[AKD4387-SB]
„ Operation sequence
1) Set up the power supply lines. (See “Other jumpers set-up”.)
Name
+15V
-15V
5V
AGND
Color
Green
Blue
Red
Black
Voltage
Comments
Attention
+12a+15V
-12a-15V
+4.75a+5.25V
0V
For regulator and
op-amps.
For op-amps.
For AK4387.
GND
This jack should be always connected to power
supply.
This jack should be always connected to power
supply.
This jack should be always connected to power
supply.
This jack should be always connected to power
supply.
Table 1. Set up of power supply lines
Each supply line should be distributed from the power supply unit.
2) Set-up the jumper pins
3) Set-up the DIP switches. (See the followings.)
4) Power on
The AK4387 should be reset once by bringing SW4 (PDN) “L” upon power-up.
<KM084600>
2
2006/07