AKD4183 Datasheet, PDF (2/5 Pages) Asahi Kasei Microsystems – touch screen controller

[ASAHI KASEI]
[AKD4183]
„ Run the software (AK4183_070.exe)
First match Port Address of your PC environment. Measurements are started when the start button is clicked after select
Channel Selection, MODE, and Power Down 0. A result will be displayed on AD OUT Section. When carrying out
position detection, the position where pen clicked on the touch panel is measured.
Operation can set up two control commands. Continuation operation can be performed. Each data (mean, max, and min)
is also displayed at the same time. PENIRQN can be seen by the break of a command.
<KM085700>
-2-
2006/9