AK8180E Datasheet, PDF (2/4 Pages) Asahi Kasei Microsystems – AK8180E Evaluation Board

Power
There are the following three power supplies.
- VDD
The core power supply of AK8180E (+1.25V or +1.65V)
- VSS
The core power supply of AK8180E (-1.25V or -1.65V)
- VTT
Power supply for the end of the output load resistor (GND)
Note) GND of the SMA terminal is connected to the VTT.
Clock Input
The clock input signal can terminate at 50Ω if needed. (50Ω is connected to R1 pattern)
Inputs 200MHz or less.
AKD8180E
Output load circuit
Each output line is terminated to VTT with 50Ω.
Q0-17
50Ω
VTT
AKD8180E-E-00
2
2012/9