AKD4627-A Datasheet, PDF (19/72 Pages) Asahi Kasei Microsystems – Evaluation board Rev.0 for AK4627

[AKD4627-A]
[ Interval ]: Interval time
Valid boxes for each process command are shown bellow.
· No_use: None
· Register: [Address], [Data], [Interval]
· Reg(Mask): [Address], [Data], [Mask], [Interval]
· Interval: [Interval]
· Stop: None
· End: None
Control Buttons
The function of Control Button is shown bellow.
[Start]: Executing the sequence
[Help]: Opening a help window
[Save]: Saving sequence settings as a file. The file name is “*.aks”.
[Open]: Opening a sequence setting file “*.aks”.
[Close]: Closing the dialog box and finish the process.
Stop of the sequence
When “Stop” is selected in the sequence, processing is paused and it starts again when [Start] button is clicked.
Restarting step number is shown in the “Start Step” box. When finishing the process until the end of sequence, “Start
Step” will return to “1”.
The sequence can be started from any step by writing the step number to the “Start Step” box.
Write “1” to the “Start Step” box and click [Start] button, when restarting the process from the beginning.
<KM102000>
-19-
2010/08