AKD5374-A Datasheet, PDF (13/28 Pages) Asahi Kasei Microsystems – Evaluation board Rev.1 for AK5374

[AKD5374-A]
„ EEPROM Write program for the AK5374: AK5374EEPROM.exe
1) Set up the jumper pins as the followings.
JP15
P17
PC-EPAI PC-CSN
JP18
PC-SK
JP20
JP27
PC-EPAO REGMODE
EEP 5373
2) Connect USB2 Port of the AKD5374-A to PC with an USB cable. Windows recognizes the mirco controller
device automatically. Device manage shows “PICkit2 Microcontroller Programmer” in “Human Interface Devices”
if Windows recognizes the device successfully.
[KM101601]
Figure 15. Device Manger “Human Interface Devices”
- 13 -
2010/08