AKD4621-B Datasheet, PDF (11/50 Pages) Asahi Kasei Microsystems – AK4621 Evaluation board Rev.2

[AKD4621-B]
„ Toggle Switch: SW2
[SW2]: Resets the AK4621 and the AK4114. Keep “H” during normal operation.
However, “L” must be input once after power supply is done.
„ Serial control mode
The AK4621 can be controlled via the printer port (parallel port) of IBM-AT compatible PC. Connect PORT3
(CR-I/F) with PC by 10-wire flat cable packed with the AKD4621-B.
Take care of the direction of connector. There is a mark at pin#1.
Connect
CSN
CCLK
PC
CDTI ^AKD4621-B
CDTO
10 wire
10pin
flat cable Connector
10pin Header
Figure 2. Connect of 10 wire flat cable
<KM100802>
- 11 -
2010/12