AKD4114-B_09 Datasheet, PDF (11/30 Pages) Asahi Kasei Microsystems – AK4114 Evaluation Board Rev.0

[AKD4114-B]
■Operation Overview
Function, register map and testing tool can be controlled by this control soft. These controls are selected by upper tabs.
Buttons which are frequently used such as register initializing button “Write Default”, are located outside of the switching
tab window. Refer to the “■ Dialog Boxes” for details of each dialog box setting.
1. [Port Reset]
2. [Write Default]
3. [All Write]
4. [All Read]
5. [Save]
6. [Load]
7. [All Req Write]
8. [Data R/W]
9. [Sequence]
10. [Sequence(File)]
11. [Read]
: For when connecting to USB I/F board (AKDUSBIF-A)
Click this button after the control soft starts up when connecting USB I/F board
(AKDUSBIF-A).
: Register Initializing
When the device is reset by a hardware reset, use this button to initialize the registers.
: Executing write commands for all registers displayed.
: Executing read commands for all registers displayed.
: Saving current register settings to a file.
: Executing data write from a saved file.
: “All Req Write” dialog box is popped up.
: “Data R/W” dialog box is popped up.
: “Sequence” dialog box is popped up.
: “Sequence(File)” dialog box is popped up.
: Reading current register settings and display on to the Register area
(on the right of the main window).
This is different from [All Read] button, it does not reflect to a register map, only
displaying hexadecimal.
[KM076604]
Figure 6. Window of [ FUNCTION]
- 11 -
2009/08