|
AP1159ADSXX Datasheet, PDF (1/19 Pages) Asahi Kasei Microsystems – 14V Input / 100mA Low voltage Output LDO Regulator | |||
|
[AP1159ADSXX]
-Preliminary- AP1159ADSXX
14V Input / 100mA Low voltage Output LDO Regulator
1. General Description
The AP1159ADSXX is a low dropout linear regulator with ON/OFF control, which can supply 100mA load
current. The IC is an integrated circuit with a silicon monolithic bipolar structure. The output voltage, trimmed
with high accuracy, is available from 0.9 to 1.2V in 0.1V steps. The output capacitor is available to use a small
0.47μF ceramic capacitor. The over current, thermal and reverse bias protections are integrated, and also the
package is small and thin type, SOT23-5. The IC is designed for space saving requirements.
2. Features
ï Available to use a small 0.47μF ceramic capacitor
ï Output Voltage
0.9V, 1.0V, 1.1V, 1.2V
ï High Precision output voltage
ï±50mV
ï Output Current
100mA
ï High ripple rejection ratio
80dB at 1kHz
ï Low Output Noise
ï Wide operating voltage range
30μVRMS
2.1V to 14.0V
ï Very low quiescent current
ï Low Standby Current
IQUT=110ïA at IOUT=0mA
0.1μA
ï On/Off control (High active)
ï Built-in Short circuit protection, thermal shutdown
ï Built-in reverse bias over current protection
ï Available very low noise application
ï Very small surface mount package SOT23-5
ï Automotive accessory equipment
ï Any Electronic Equipment
ï Battery Powered Systems
ï Mobile Communication
3. Application
Rev.0.1
-1-
2014/09
|
▷ |