AP1014AEC Datasheet, PDF (1/13 Pages) HuaXinAn Electronics CO.,LTD – Dual H-Bridge Motor Driver IC

[AP1014AEC]
AP1014AEC
7.0V Dual H-Bridge Motor Driver IC
1. Genaral Description
The AP1014AEC has four drive mode of forward, reverse, brake and standby by 2 channel H-bridge Motor
Driver corresponding to operating voltage 7.0V. It is possible to set to the input logic which was suitable for
the PWM drive with the SEL terminal. The AP1014AEC layout N-ch LDMOS FET in high side and low side
in output circuit and realize a small WL-CSP package. Also it has under voltage detection and thermal shut
down circuits. It is suitable for driving various small motor.
2. Features
 Control Supply Voltage
2.7V to 5.5V
 Wide Motor Drive Operating Voltage
2.0V to 7.0V
 Maximum Output Current (DC)
1.1A @Ta=25C, 0.8A @Ta=85C
 Maximum Output Current (Peak)
2.0A (Ta=25C, 10ms/200ms)
 H-Bridge ON Resistance
RON (TOP+BOT)=0.35Ω @Ta=25C
 Built-in Under Voltage Detection Circuit Detect VC Supply Voltage under 2.2V
 Built-in Thermal Shut Down Circuit (Tj) 175C
 Junction Temperature
150C
 Package
16-pin WL-CSP (1.96mm×1.96mm )
MS1548-E-01
-1-
2014/08