AP1013CEN Datasheet, PDF (1/15 Pages) Asahi Kasei Microsystems – 18V 1ch H-Bridge Motor Driver IC

[AP1013CEN]
AP1013CEN
18V 1ch H-Bridge Motor Driver IC
1. General Description
The AP1013CEN realizes four drive mode of forward, reverse, break and standby by 1 channel H-bridge
motor driver corresponding to operating voltage 18V. The AP1013CEN layouts N-channel LDMOSFET in
high side and low side in output circuit and realizes a small package. Also it has under voltage detection and
thermal shut down circuits. It is suitable for driving various small motor.
2. Features
 Control Power Supply Voltage (VC) 2.7V to 5.5V
 ^{Logic Terminal Supply Voltage}
1.62V to VC
 Wide Motor Driver Operating Voltage 2V to 18V
（N-channel MOSFET high side and Low side architecture）
 Maximum Output Current (DC)
1.3A
 Maximum Output Current (Peak)
2.2A (Ta=25℃, within 10ms in 200ms)
 Maximum Output Current (Peak)
3.3A (Ta=25℃, within 5ms in 200ms)
 Maximum Output Current (Peak)
5.0A (Ta=25℃, within 2ms in 200ms)
 H-Bridge On Resistance
RON(TOP+BOT)=0.38Ω@25℃
 Power-Down Mode
Quiescent current is under 1uA (Ta=25℃)
 Built-in Under Voltage Detection Circuit Detect V_VC under 2.2V
 Built-in Thermal Shut Down Circuit (Tj) 175℃
 Junction Temperature
150℃
 Package
16-pin QFN Package (3mm×3mm)
014011278-E-01
-1-
2014/12