AKD4353 Datasheet, PDF (1/25 Pages) Asahi Kasei Microsystems – EVALUATION BOARD REV.A FOR AK4353

ASAHI KASEI
[AKD4353]
AKD4353
Evaluation board Rev.A for AK4353
GENERAL DESCRIPTION
The AKD4353 is an evaluation board for AK4353, 96kHz 24bit D/A converter with DIT. The AKD4353 has
a digital interface with AKM’s wave generator using ROM data and AKM’s A/D converter evaluation
boards. Therefore, it is easy to evaluate the AK4353.
n Ordering guide
AKD4353 --- Evaluation board for AK4353
(Cable for connecting with printer port of IBM-AT compatible PC
and control software are packed with this.)
FUNCTION
• On-board clock generator
• Compatible with 2 types of interface
- Direct interface with AKM’s A/D converter evaluation boards
and direct interface with AKM’s signal generator(AKD43XX) by 10pin header
- On-board CS8414 as DIR which accepts optical input
• BNC connector for external clock input
• 10pin header for serial control interface
• On-board mute circuit for analog output
• Optical output for TX output
Opt Out
2.7∼5.5V GND
Opt In
CS8414
(DIR)
DZF
Mute
ROM
or A/D
AK4353
Lch
10pin Header
External
Clock
Divider
MCKO
MCKI
Rch
Clock
Generator
10pin Header
Control
Figure 1. AKD4353 Block Diagram
* Circuit diagram and PCB layout are attached at the end of this manual.
<KM061401>
-1-
’00/04