|
AK9970 Datasheet, PDF (1/5 Pages) Asahi Kasei Microsystems – 3-axis Magnetic Sensor with Programmable Switch | |||
|
[AK09970]
= Product brief =
AK09970
3-axis Magnetic Sensor with Programmable Switch
1. Genaral Description
AK09970 is a 3-axis magnetic sensor IC with high sensitivity and wide measurement range utilizing our
latest hall sensor technology.
Our ultra-small package of AK09970 incorporates magnetic sensors, chopper stabilized signal, amplifier
chain, and all necessary interface logic for detecting weak to strong magnetic fields in the X, Y and Z
planes independently. From its compact foot print, thin package, and extremely low power consumption,
it is suitable for a wide range of applications such as connected home, door & window opening/close
sensing, and magnetic tamper detection of IoT systems or smart meters just to name a few.
2. Features
ïµ Functions:
ï 16 bit data out for each 3-axis magnetic component
ï Programmable threshold 3-axis magnetometer
ï Built-in A to D Converter for magnetometer data output
ï Selectable sensor measurement range and sensitivity setting
ï² High sensitivity setting
ï¬ Sensitivity: 1.1 µT/LSB (typ.)
ï¬ Measurement range: ± 36 mT
ï² Wide range setting
ï¬ Sensitivity: 3.1 µT/LSB (typ.)
ï¬ Measurement range: X and Y-axis ï ±34.9mT, Z-axis ï ±101.5mT
ï Serial interface
ï² I2C bus interface
Standard and Fast mode compliant with Philips I2C specification Ver.2.1
ï² 4-wire SPI
ï Operation mode
ï² Power-down, Single measurement, Continuous measurement
ï 3-axis programmable switch function
ï Output pin for event notification
ï² INT pin and OD-INT pin
ï DRDY function for measurement data ready
ï Magnetic sensor overflow monitor function
ï Built-in oscillator for internal clock source
ï Selectable sensor drive
ï² Low power drive / Low noise drive
ïµ Operating temperatures:
ï
-40ËC to +85ËC
ïµ Operating supply voltage:
ï
+1.7V to +3.6V
ïµ Current consumption (VDD = +1.8V):
ï Power-down: 2.0 nA (typ.)
ï Measurement:
ï² Average current consumption at 1 Hz/10Hz repetition rate
ï¬ Low power drive: 0.6 µA(typ.)@1HzODR, 2.7 µA(typ.)@10HzODR
ï¬ Low noise drive: 1.5 µA(typ.) @1HzODR, 11.9 µA(typ.)@10HzODR
ïµ Package
ï AK09970N 16-pin QFN package: 3.0mm x 3.0mm x 0.75mm
Product brief
-1-
2017/1
|
▷ |