AT1361 Datasheet, PDF (1/15 Pages) Aimtron Technology – 1MHz,1A Synchronous Buck Converter

Features
• High efficiency (95%) possible
• No Schottky Diode Required
• 1A Output Current at 5V input 3.3V output
• Oscillation frequency 1.0MHz
• Built-in ON/OFF Function
• Built-in Short Circuit Protection
• Low Dropout Operation: 100% Duty Cycle
• Stand-by current max. 1µA
• Input voltage: 2.5V ~5.5V
Applications
• Power Supply for portable devices
AT1361
1MHz,1A Synchronous Buck Converter
General Description
The AT1361 provides complete control for a
DC/DC converter optimized for high-performance
microprocessor applications. It is operated on
current mode architecture for excellent line and
load transient response. 1MHz operation frequency
is allowing the use of small surface mount inductor
and capacitor. The internal synchronous switch
increases efficiency and eliminates the need for an
external Schottky diode. The AT1361 is a family
of low-noise synchronous step-down DC/DC
converters that is ideally suited for systems
powered from a 1-cell Li-ion battery or from a
3-cell to 4-cell NiCd, NiMH, or alkaline battery. It
can also be used to USB-Based power system.
Block Diagram
Aimtron reserves the right without notice to change this circuitry and specifications.
7F, No.9, PARK AVENUE II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: [phone] Fax: [phone]
WWW: http://www.aimtron.com.tw
1/11/2008 REV:1.0
Email:[e-mail]
1