AMLB-Z Datasheet, PDF (6/7 Pages) AIMTEC – Up to 700mA | Step Up LED Driver

Series AMLB-Z
Up to 700mA | Step Up LED Driver
Output Current Adjustment by PWM Control:
A Pulse Width Modulation (PWM) signal with a duty cycle DPWM can be applied to the DIM pin as shown below.
Driving DIM Via Open Collector Transistor
The DIM pin can also be driven via an open collector transistor as shown below.
Driving the VADJ from a Microcontroller
The DIM can be driven from an open drain output of a microcontroller as shown below.
www.aimtec.com
F 051e R12.A
Tel: [phone]
6 of 7
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only