English
Language : 

AM1G-NZ Datasheet, PDF (5/5 Pages) AIMTEC – 1 Watt | DC-DC Converter
◁
Recommended Circuits
+ Vin
LDM
C1
C2
‐ Vin
Single Output
CNTL
D1 R1
C3
2
3 DC
1
Series AM1G-NZ
1 Watt | DC-DC Converter
6
DC 8
7
+Vout
Cout
Cs
‐ Vout
+ Vin
LDM
C1
C2
‐ Vin
Dual Output
CNTL
D1 R1
C3
2
3 DC
1
6
DC 7
8
LDM1 +Vout
Cout
GND
Cout
LDM1
‐ Vout
Model
5 Vin
12 Vin
24 Vin
48 Vin
C1
C2
LDM
C3
100µF 47µF 4.7 - 12 µH 47µF / 100V
100µF 47µF 4.7 - 12 µH 47µF / 100V
10µF 1µF 4.7 - 12 µH 47µF / 100V
10µF 1µF 4.7 - 12 µH 47µF / 100V
R1 = ((Vcd – Vd1 – 1.0) / Icntl)‐ 300
D1
RB160M-60/1A
RB160M-60/1A
RB160M-60/1A
RB160M-60/1A
R1
See Formula
See Formula
See Formula
See Formula
LDM1
2.2 - 10 µH
2.2 - 10 µH
2.2 – 10 µH
2.2 - 10 µH
CS
10 - 22µF
10 - 22µF
10 - 22µF
10 - 22µF
Cout
100µF
100µF
100µF
100µF
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 051e R8
Tel: +1 514 620 2722
5 of 5
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only