AMLDL-Z_16 Datasheet, PDF (4/14 Pages) AIMTEC – Up to 1000mA | LED Driver

Output Current Adjustment by External DC Control Voltage:
The nominal output current is given by:
Iout ˜ ^{0.08 x Vadj}
X
Series AMLDL-Z
Up to 1000mA | LED Driver
Model Number
AMLDL-3030Z
AMLDL-3035Z
AMLDL-3050Z
AMLDL-3060Z
AMLDL-3070Z
AMLDL-30100Z
X
0.327
0.280
0.197
0.165
0.1388
0.095
VADJ
0.3 -1.25V
AMLDL-Z
-Vin
GND
+Vout
1^st LED
1
-Vout
Last LED
1
Vctrl +5v
R1 30K
VADJ
R2
10K
AMLDL-Z
-Vin
+Vout
1^st LED
1
-Vout
1
VADJ =
R2
R1 + R2
X Vctrl
+Vin
10K
10K
1 _TL431
VADJ
10K
AMLDL-Z
-Vin
+Vout
1^st LED
1
-Vout
1
Resistive Dimming Control
A simplified dimming control can be achieved using a variable resistor connected between VADJ and GND. Capacitor CADJ
is optional, it is installed to limit AC mains interference and high frequency noise. The recommended value of CADJ is
0.22µF.
The nominal output current is given by:
Ioutnom= Iout x Radj
Radj + 200K
NOTE: Typical error is ±10% with resistive dimming control
CADJ
RADJ
VADJ
AMLDL-Z
-Vin
+Vout
1^st LED
1
-Vout
1
www.aimtec.com
F 051e R9.I
Tel: [phone]
4 of 14
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only