AMEOF3-JZ Datasheet, PDF (4/4 Pages) AIMTEC – Continuous short circuit protection

O
Series AMEOF3-JZ
3 Watt | AC-DC Converter
Recommended EMC class A external circuit:
FUSE
1A/250V NTC
AC L
MOV
S14K350
AC N
L1
4.7mH
C1 ⁺
10µF/450V
Single Output
3
5
AC
7
1
12
DC
10
CY1
1nF/400VAC
L2
2.2µH
+ C2
C3 ₊ ^TVS
Pi filter
+Vout
C4
0.1µF/50V
- Vout
Recommended EMC class B external circuit:
FUSE
1A/250V
AC L
AC N
MOV
S14K350
GND
Model
3.3 Vout
5 Vout
9 Vout
12 & 15
Vout
24 Vout
LCM
3.5mH
LDM
0.33mH
CY2
1nF/
400VAC
CX
0.1µF/ _CY3
275VAC _1nF/
400VAC
NTC
+ _C1
4.7µF/
450V
C2
330 µF /
25V
150 µF /
35V
100 µF /
35V
C3
120 µF / 25V
68 µF / 35V
Single Output
3
5
AC
7
1
12
DC
10
CY1
1nF/400VAC
L2
2.2µH
+ C2
C3 + ^TVS
Pi filter
+Vout
C4
0.1µF/50V
- Vout
TVS
7V
12V
20V
30V
Note: For Safety compliance we recommend minimum
PCB trace distance of 3mm, minimum distance between
PCB traces of 6mm, primary to secondary circuit traces
distance between minimum of 6.4mm.
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 052e R0
Tel: [phone]
4 of 4
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only