AME40-MJZ Datasheet, PDF (4/4 Pages) AIMTEC – 40 Watt | AC-DC / DC-DC Converter

Series AME40-MJZ
40 Watt | AC-DC / DC-DC Converter
Trimming
Output voltage can be externally trimmed by utilizing the methods as shown below
Fixed Resistor Variable Potentiometer
Leave open if not used.
AME40‐12SMJZ
Trim down %
1
Vout (VDC)
11.88
Rt down (KΩ) 183.233
Trim up %
1
Vout (VDC)
12.12
Rt up (KΩ) 211.778
2
11.76
111.59
2
12.24
57.03
3
11.64
79.474
3
12.36
32.596
4
11.52
61.246
4
12.48
22.642
5
11.4
49.499
5
12.6
17.238
6
11.28
41.299
6
12.72
13.845
7
11.16
35.249
7
12.84
11.516
8
11.04
30.602
8
12.96
9.819
9
10.92
26.921
9
13.08
8.527
10
10.8
23.933
10
13.2
7.511
AME40‐24SMJZ
Trim down %
1
Vout (VDC)
23.76
Rt down (KΩ) 471.081
Trim up %
1
Vout (VDC)
24.24
Rt up (KΩ) 239.556
2
23.52
287.942
2
24.48
64.606
3
23.28
205.845
3
24.72
36.982
4
23.04
159.249
4
24.96
25.728
5
22.8
129.221
5
25.2
19.619
6
22.56
108.258
6
25.44
15.783
7
22.32
92.793
7
25.68
13.15
8
22.08
80.914
8
25.92
11.232
9
21.84
71.504
9
26.16
9.771
10
21.6
63.865
10
26.4
8.622
AME40‐48SMJZ
Trim down %
1
Vout (VDC)
47.52
Rt down (KΩ) 1216.754
Trim up %
1
Vout (VDC)
48.48
Rt up (KΩ)
374
2
47.04
756.639
2
48.96
86.766
3
46.56
545.609
3
49.44
48.699
4
46.08
424.485
4
49.92
33.664
5
45.6
345.902
5
50.4
25.613
6
45.12
290.797
6
50.88
20.597
7
44.64
250.014
7
51.36
17.172
8
44.16
218.613
8
51.84
14.684
9
43.68
193.691
9
52.32
12.796
10
43.2
173.429
10
52.8
11.313
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 052e R8
Tel: [phone]
4 of 4
Toll free: + 1 888 9 AIMTEC (924 6832)
North America only