AM2LS-NZ Datasheet, PDF (4/4 Pages) AIMTEC – Input / Output Isolation 1500 and 3000 VDC

Load Accuracy Tolerance Graph
10 %
5%
Rated
Output
Voltage
Typical _{load line}
+2.5 %
-2.5 %
-7.5 %
70 %
10
50
100
%
%
%
Output Current % (Nominal Input)
Series AM2LS-NZ
2 Watt | DC-DC Converter
Derating
Free Air Convection
71 ºC
100
85 ºC
80
60
50%
40
Safe Operating Area
3.3V & 5V
Others
20
0
71C
85C
105C
-50 -30 0 40 80 100 120
Ambient Temperature º C
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 051e R12.G
Tel: [phone]
4 of 4
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only