AM10W-NZ Datasheet, PDF (4/4 Pages) AIMTEC – 10 Watt | DC-DC Converter

Typical Application circuit
FUSE
1A
+ Vin
Single Output
NTC
+ Vin
+
MOV
S20K1000
- Vin
Model
5 Vout
9 Vout
24 Vout
DC
- Vin
C2
220 µF / 35V
120 µF / 35V
68 µF / 35V
DC
-
TVS
7V
12V
33V
+
C1 C2
1µF/50V
Series AM10W-NZ
10 Watt | DC-DC Converter
+ Vout
TVS
- Vout
Recommended EMC Circuit
+ Vin
FUSE
1A
LDM
NTC ^{4.7mH/0.5A LCM}
10mH
+ _C1
R1
+ _C2
R2
MOV
S20K1000
- Vin
+ _C3
R3
+ _C4
R4
Single Output
+ Vin
+ Vout
DC
- Vin
DC
- Vout
C6 + ^TVS
C5
1µF/50V
Model
5 Vout
9 Vout
24 Vout
C1, C2, C3 &C4 R1, R2, R3 & R4
47 µF/450V
1MΩ / 2W
C6
220 µF / 35V
120 µF / 35V
68 µF / 35V
TVS
7V
12V
33V
+ Vout
- Vout
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 051e R13
Tel: [phone]
4 of 4
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only