AMEL10-MJZ Datasheet, PDF (3/3 Pages) AIMTEC – Continuous Short Circuit Protection

Derating
Free Air Convection
100
80
Safe Operating Area
70
Input 110-240VAC or
60
140-340VDC
50
40
20
0
- 2_-5₂₀ -10 ₀
55
70
20 40 60 80 100
Ambient Temperature º C
Typical application circuit
FUSE
2A/250V
AC L
Single Output
AC L
4
AC N
MOV
S14K350
AC
AC N
DC
3
Series AMEL10-MJZ
10 Watt | AC-DC / DC-DC Converter
Free Air Convection at 25°C
100
80
Safe Operating Area
60
40
20
0
85 100
(100) (140)
240
(340)
Input Voltage VAC (VDC)
264
(270)
C1 C2
1µF/50V
+ ^TVS
+ Vout
- Vout
Class B compliance recommended circuit
FUSE
2A/250V
AC L
AC N
MOV
S14K350
GND
LDM
4.7µH/2A
LCM
2.2mH
CX
0.1µF/
275VAC
R1
12Ω/3W
CY1
1nF/
400VAC
CY2
1nF/
400VAC
R2
12Ω/3W
Single Output
AC N
+Vout
AC
AC L
DC
- Vout
C1 ^{C2 +}
1µF/50V
+Vout
TVS
- Vout
Model
3.3 & 5 Vout
9Vout
12 & 15 Vout
24 Vout
C2
TVS
220 µF / 10V
7V
120 µF / 25V
12V
120 µF / 25V
20V
68 µF / 35V
30V
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 052e R8
Tel: [phone]
3 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only