AME40-MAZ_13 Datasheet, PDF (3/3 Pages) AIMTEC – 40 Watt | AC-DC / DC-DC Converter

Pin Out Specifications
Pin Single
Dual
1 AC Input (N) AC Input (N)
2 AC Input (L) AC Input (L)
3
+V Output
+V Output
4
-V Output
Common
5
N. C.
-V Output
Dimensions
90.50
(3.56)
2
3
Top View ₄
Series AME40-MAZ
40 Watt | AC-DC / DC-DC Converter
1
5
4.60
(0.18)
81.30
(3.20)
Side View
4.60
(0.18)
1.30
(0.05)
Derating
Free Air Convection
50º C
100
80
60
Safe Operating Area
40
20
0
- 40 - 20 0
20
40
60 80⁸⁵ 100
Ambient Temperature º C
DIV: 10.00 (0.40)
5Ø 1.30 (Ø 0.05)
Dimensions mm (inch)
Case Tolerance ±0.50 (±0.02)
Pin Diameter 1.30 ± 0.05 (0.05 ± 0.002)
Pin Pitch Tolerance ±0.35 (±0.014)
NOTE: 1. Datasheets are updated as needed and as such,
specifications are subject to change without notice. Once printed or
downloaded, datasheets are no longer controlled by Aimtec; refer to
www.aimtec.com for the most current product specifications. 2. Product
labels shown, including safety agency certifications on labels, may vary
based on the date manufactured. 3. Mechanical drawings and
specifications are for reference only. 4. All specifications are measured
at an ambient temperature of 25°C, humidity<75%, nominal input voltage
and at rated output load unless otherwise specified. 5. Aimtec may not
have conducted destructive testing or chemical analysis on all internal
components and chemicals at the time of publishing this document. CAS
numbers and other limited information are considered proprietary and
may not be available for release. 6. This product is not designed for use
in critical life support systems, equipment used in hazardous
environments, nuclear control systems or other such applications which
necessitate specific safety and regulatory standards other the ones listed
in this datasheet. 7. Warranty is in accordance with Aimtec’s standard
Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 052e R8.F
Tel: [phone]
3 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only