AME30-MAZ_12 Datasheet, PDF (3/3 Pages) AIMTEC – 30 Watt | AC-DC / DC-DC Converter

Pin Out Specifications
Pin Single
Dual
1 AC Input (N) AC Input (N)
2 AC Input (L) AC Input (L)
3
+V Output
+V Output
4
-V Output
Common
5
N. C.
-V Output
Dimensions
90.50
(3.56)
2
3
Top View ₄
Series AME30-MAZ
30 Watt | AC-DC / DC-DC Converter
1
5
4.60
(0.18)
81.30
(3.20)
Side View
4.60
(0.18)
DIV: 10.00 (0.40)
5Ø 1.30 (Ø 0.05)
Dimensions mm (inch)
Case Tolerance ±0.50 (±0.02)
Pin Diameter 1.30 ± 0.05 (0.05 ± 0.002)
Pin Pitch Tolerance ±0.35 (±0.014)
1.30
(0.05)
Derating
Free Air Convection
55º C
100
80
60
Safe Operating Area
40
20
0
- 40 - 20 0
20 40 60 80⁸⁵ 100
Ambient Temperature º C
NOTE: 1. Datasheets are updated as needed and as such, specifications
are subject to change without notice. Once printed or downloaded,
datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for
the most current product specifications. 2. Product labels shown, including
safety agency certifications on labels, may vary based on the date
manufactured. 3. Mechanical drawings and specifications are for reference
only. 4. All specifications are measured at an ambient temperature of 25°C,
humidity<75%, nominal input voltage and at rated output load unless
otherwise specified. 5. Aimtec may not have conducted destructive testing
or chemical analysis on all internal components and chemicals at the time of
publishing this document. CAS numbers and other limited information are
considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment
used in hazardous environments, nuclear control systems or other such
applications which necessitate specific safety and regulatory standards
other the ones listed in this datasheet. 7. Warranty is in accordance with
Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 052e R8.F
Tel: [phone]
3 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only