AME2-NJZ Datasheet, PDF (3/3 Pages) AIMTEC – 2 Watt I AC-DC / DC-DC Converter

Application circuit for Vin: 85-264VAC
FUSE
1A/250V
AC L
Single Output
AC L
+ Vout
+
C3
AC N
20
AC
22
AC N
DC
‐ Vout
*GND connection not allowed
Series AME2-NJZ
2 Watt | AC-DC / DC-DC Converter
C1 C2
1µF/50V
+ ^TVS
+ Vout
‐ Vout
Model
5 Vout
12 Vout
24 Vout
C2
100 µF / 35V
68 µF / 35V
47 µF / 35V
C3
TVS
7V
4.7 µF / 400V
20V
30V
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 052e R8
Tel: [phone]
3 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only