AME2-JZ Datasheet, PDF (3/3 Pages) AIMTEC – Over current, Short Circuit Protection

Application circuit
FUSE
1A/300V
NTC
AC L
MOV
S14K350
AC N
*GND connection not allowed
Series AME2-JZ
2 Watt | AC-DC / DC-DC Converter
Single Output
AC L
4
CX
0.1µF/
305VAC
AC
AC N
DC
3
C1 C2
1µF/50V
+ ^TVS
+ Vout
- Vout
EMC recommended circuit
FUSE
1A/300V
NTC
AC L
AC N
MOV
S14K350
CY1
2.2nF/
400VAC
CY2
2.2nF/
400VAC
LCM
10mH
GND
Model
3.3 & 5 Vout
9 Vout
12 & 15 Vout
24 Vout
C2
TVS
220 µF / 35V
7V
120 µF / 35V
12V
120 µF / 35V
20V
68 µF / 35V
30V
Single Output
AC L
4
CX
0.1µF/
305VAC
AC
AC N
DC
3
+ ^TVS
C1
1µF/50V C2
+ Vout
- Vout
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 052e R8
Tel: [phone]
3 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only