AM1LR-NZ Datasheet, PDF (3/3 Pages) AIMTEC – Continuous short circuit protection

Derating
Free Air Convection
71º C
100
80
Safe Operating Area
60
40
20
0
- 40 - 20 0
20 40 60 80⁸⁵ 100
Ambient Temperature º C
Series AM1LR-NZ
1 Watt | DC-DC Converter
Input Reflected Ripple Current Test Circuit
L1
Test
Vin+
(4.7 µh) Point
Vo+
+ Aimtec
C1
(220 µf)
Vin-
DC-DC
Converter
RL
(Full
Load)
-
Vo-
* Tested at full load, and nominal input
EMI Recommended Circuit (Class B)
LDM
6.8µH
C1
4.7µF/
50V
+V input
+V output
DC/DC
Converter
C2
Load
-V input
-V output
Output Capacitor (C2)
Vout
C2
(VDC)
(µF)
3.3 & 5
10
12
2.2
15
1
NOTE: 1.Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified.5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 051e R12
Tel: [phone]
3 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only