AM15C-Z Datasheet, PDF (3/4 Pages) AIMTEC – 15Watt | DC-DC Converter

Safety Specifications
Parameters
Agency Approvals
CE
Standards
EN 55022 Class A
EN 61000-4-2 Perf. Criteria A
EN 61000-4-3 Perf. Criteria A
EN 61000-4-4 Perf. Criteria A (external 220uF/100V cap required)
EN 61000-4-5 Perf. Criteria A (external 220uF/100V cap required)
EN 61000-4-6 Perf. Criteria A
EN 61000-4-8 Perf. Criteria A
NOTE: also designed to meet IEC 60950-1:2001
Series AM15C-Z
15Watt | DC-DC Converter
Test Circuits
Notes
1. Input filter (C1, C2, L) are needed to meet conducted emission (EN 55022 Class A) and should be mounted as close as possible to the
converter.
+
-
C1
2.2uF/100V
L 12uH
C2
2.2uF/100V
+V input +V output
DC/DC
Load
Converter
- V input
-V output
Pin Out Specifications
Pin
Single
Dual
1
+ V input
+ V input
2
- V input
- V input
3 On/Off Control On/Off Control
4
+ V output
+ V output
5
Trim
Common
6
- V output
- V output
www.aimtec.com
F 051e R11
Tel: [phone]
3 of 4
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only