AMLDL-RZ Datasheet, PDF (2/17 Pages) AIMTEC – Up to 700mA | LED Driver

Series AMLDL-RZ
Up to 700mA | LED Driver
General Specifications (continued)
Parameters
Maximum case temperature
Thermal Impedance
Conditions
Free air convection
Typical
+40
Maximum
105
Units
o_C
o_C/W
Cooling
Free air convection
Humidity
Case material
95
Non-Conductive Black Plastic (UL94-V0 rated)
% RH
Weight
2.6
g
Dimensions (L x W x H)
MTBF
Maximum Soldering Temperature
0.80 x 0.40 x 0.27 inches
20.32 x 10.16 x 6.88 mm
>1, 600,000 hrs (MIL-HDBK-217 F at +25 ^oC)
1.5mm from case for 10sec.
260
o_C
NOTES:
1.Reversed polarity at the input power will damage the driver. The input ground must not be connected to the negative output.
2.Leave the pin VADJ opened if not used , grounding VADJ will shut the driver off, connecting VADJ to +Vin will damage the driver.
3.Maximum output open voltage is equal to input voltage
Safety Specifications
Parameters
Standards
Designed to meet EN 60960-1
Pin Out Specifications
Pin
Single
1
- V Input
- DC Supply
2
Vadj
PWM/ON/OFF or not used
7
- V Output
LED Cathode connection
8
+ V Output
LED Anode connection
14
+ V Input
+ DC Supply
www.aimtec.com
F 051e R12.E
Tel: [phone]
2 of 17
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only