AMLDL-3060-RZ Datasheet, PDF (2/17 Pages) AIMTEC – LED Driver

Series AMLDL-RZ
Up to 700mA | LED Driver
General Specifications (continued)
Parameters
Maximum case temperature
Thermal Impedance
Conditions
Free air convection
Typical
+40
Maximum
105
Units
o_C
o_C/W
Cooling
Free air convection
Humidity
Case material
95
Non-Conductive Black Plastic (UL94-V0 rated)
% RH
Weight
2.6
g
Dimensions (L x W x H)
MTBF
Maximum Soldering Temperature
0.80 x 0.40 x 0.27 inches
20.32 x 10.16 x 6.88 mm
>1, 600,000 hrs (MIL-HDBK-217 F at +25 ^oC)
1.5mm from case for 10sec.
260
o_C
NOTES:
1.Reversed polarity at the input power will damage the driver. The input ground must not be connected to the negative output.
2.Leave the pin VADJ opened if not used , grounding VADJ will shut the driver off, connecting VADJ to +Vin will damage the driver.
3.Maximum output open voltage is equal to input voltage
Safety Specifications
Parameters
Agency approvals
Standards
CE, EN 55015, EN 61547
Electrostatic Discharge Immunity
RF, Electromagnetic Field Immunity
Electrical Fast Transient/Burst Immunity
Surge Immunity
RF, Conducted Disturbance Immunity
Power frequency Magnetic Field Immunity
Voltage dips, Short Interruptions Immunity
Pin Out Specifications
Pin
Single
1
- V Input
- DC Supply
2
Vadj
PWM/ON/OFF or not used
7
- V Output
LED Cathode connection
8
+ V Output
LED Anode connection
14
+ V Input
+ DC Supply
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
www.aimtec.com
F 051e R12.F
Tel: [phone]
2 of 17
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only