AMLD-Z_13 Datasheet, PDF (2/13 Pages) AIMTEC – Up to 1000mA | LED Driver

Series AMLD-Z
Up to 1000mA | LED Driver
General Specifications
Parameters
Conditions
Typical
Maximum
Switching frequency
100% load
20 - 500
Operating temperature
-40 to +85
Storage temperature
-40 to +150
Derating
See derating curve
Maximum case temperature
110
Thermal Impedance
Free air convection
+30
Cooling
Free air convection
Humidity
95
Case material
Non-Conductive Black Plastic (UL94-V0 rated)
Weight
12.5
Dimensions (L x W x H)
MTBF
1.25 x 0.80 x 0.49 inches
31.75 x 20.32 x 12.45 mm
> 950 000hrs (MIL-HDBK-217 F at +25 ^oC)
Maximum Soldering Temperature
1.5mm from case for 10sec.
260
NOTES:
1. Reversed polarity at the input power will damage the driver. The input ground must not be connected to the negative output.
2. Leave the pin VADJ opened if not used, grounding VADJ will shut the driver off, connecting VADJ to +Vin will damage the driver.
3. Maximum output open voltage is equal to input voltage.
Units
KHz
o_C
o_C
o_C
o_C/W
% RH
g
o_C
Safety Specifications
Parameters
Agency approvals
CE
EN 55015 (CISPR 15)
EN 61547
IEC 61000-4-2 (Perf. Criteria A)
Standards
IEC 61000-4-3 (Perf. Criteria A)
IEC 61000-4-4 (Perf. Criteria A)
IEC 61000-4-5 (Perf. Criteria A)
IEC 61000-4-6 (Perf. Criteria A)
IEC 61000-4-8 (Perf. Criteria A)
Pin Out Specifications
Pin
Single
2
- V Input
- DC Supply
3
- V Input
- DC Supply
4
Vadj
PWM/ON/OFF or not used
9
- V Output
LED Cathode connection
11
- V Output
LED Cathode connection
14
+ V Output
LED Anode connection
16
+ V Output
LED Anode connection
22
+ V Input
+ DC Supply
23
+ V Input
+ DC Supply
www.aimtec.com
F 051e R12.G
Tel: [phone]
2 of 13
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only