AMER48-KZ-C1 Datasheet, PDF (2/2 Pages) AIMTEC – 1000mA | AC-DC LED driver

Series AMER48-KZ-C1
1000mA | AC-DC LED driver
General Specifications (continued)
Parameters
Temperature coefficient
Conditions
Typical
0.05
Maximum
Units
% / ^oC
Cooling
Free Air Convection
Humidity
95
% RH
Case material
Aluminum
Weight
750
g
Dimensions (L X H X W)
MTBF
5.90 x 2.68 x 1.97 inches 150.00 x 68.00 x 50.00 mm
> 50,000 hrs (MIL-HDBK-217 F at +25 ^oC)
*NOTE: Converters do not have Over Temperature Protection and will be damaged if their maximum case temperature is
exceeded.
Safety Specifications
Parameters
Agency approvals
Standards
CE
GB195110.1-2004/IEC61347-1:2003, EN55015, EN61000, EN61547
Dimensions
15.00
(0.59)
Top View
150.00
(5.90)
120.00
(4.72)
15.00
(0.59)
4.00
(0.16)
200.00
(8.00)
Input Cable is 18AWG at 20cm
136.00
(5.35)
Side View
200.00
(8.00)
Output Cable is 18AWG at 20cm
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 052.1e R1.B
Tel: [phone]
2 of 2
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only