AMEPR8-2435KZ Datasheet, PDF (2/2 Pages) AIMTEC – up to 700mA | AC-DC LED driver

Series AMEPR7/8-KZ
up to 700mA | AC-DC LED driver
General Specifications (continued)
Parameters
Conditions
Typical
Maximum
Units
Humidity
95
% RH
Case material
ABS (Acrylonitrile-Butadiene-Styrene Co-polymers)
Potting
White epoxy (IP67 rated)
Wires
UL1015 18AWG *20CM
Weight
88
g
Dimensions (L X H X W)
MTBF
3.0 x 1.1 x 1.5 inches 76.00 x 28.00 x 38.00mm
50,000 hrs (MIL-HDBK-217 F at +25 ^oC)
* NOTE: Converters do not have Over Temperature Protection and will be damaged if their maximum case temperature is
exceeded.
Safety Specifications
Parameters
Agency approvals CE
Standards
GB195110.1-2004/IEC61347-1:2003, EN55015, EN61000, EN61547
Dimensions
76.00
(3.00)
66.00
(2.60)
5.00
(0.20)
4.00
(0.16)
66.00
(2.60)
38.00
(1.50)
3.00
(0.12)
www.aimtec.com
F 052.1e R1.D
10.00
(0.39)
NOTE: 1. Datasheets are updated as needed and as such,
specifications are subject to change without notice. Once printed
or downloaded, datasheets are no longer controlled by Aimtec;
refer to www.aimtec.com for the most current product
specifications. 2. Product labels shown, including safety agency
certifications on labels, may vary based on the date
manufactured. 3. Mechanical drawings and specifications are for
reference only. 4. All specifications are measured at an ambient
temperature of 25°C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified. 5. Aimtec may not
have conducted destructive testing or chemical analysis on all
internal components and chemicals at the time of publishing this
document. CAS numbers and other limited information are
considered proprietary and may not be available for release. 6.
This product is not designed for use in critical life support
systems, equipment used in hazardous environments, nuclear
control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in
this datasheet. 7. Warranty is in accordance with Aimtec’s
standard Terms of Sale available at www.aimtec.com.
Tel: [phone]
2 of 2
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only