AMEPR5-AZ Datasheet, PDF (2/3 Pages) AIMTEC – up to 1A | AC-DC / DC-DC LED driver

Series AMEPR5-AZ
up to 1A | AC-DC / DC-DC LED driver
General Specifications (continued)
Parameters
Conditions
Operating temperature
With derating over 55°C
Maximum case temperature
Storage temperature
Temperature coefficient
Cooling
Humidity
Case material
Potting
Wires
Weight
Dimensions (L X Diameter)
MTBF
Typical
0 to +80
-40 to +95
±0.02
Free air convection
Plastic
Epoxy (IP67 rated)
UL1015 22AWG * 10CM
22
29 x 26.5 mm (1.14x1.04 inch)
>400,000 hrs (MIL-HDBK-217F at +25°C)
Maximum
100
Units
o_C
o_C
o_C
% / ^oC
95
% RH
g
Environment Approval
Test
Parameters
Wave form
Acceleration amplitude
Shock
Bump duration
Converter operation
Number of bumps
Test mode
Vibration
Displacement
Acceleration
Converter operation
Conditions
Half sine wave
5gn
30ms
Before and after test, body mounted (on chassis)
18 (3 in each direction for every axis)
Sweep sine, 10-100Hz, speed 0.05Hz/s
1 mm
3g, 3 loops 30min one cycle, 3h total, every axis tested
Before and after test, body mounted (on chassis)
Safety Specifications
Parameters
Agency approvals cULus, CE, FCC
Standards
EN61347-1, EN61347-2-13, IEC62384, UL8750, UL60950-1, EN55015, EN55024
Radiated and Conducted Emission
FCC Part 15 Subpart B, Class B, ANSI C63.4 :2003
EMI - Conducted and radiated emission
EN 55022
Harmonic Current Emissions
IEC/EN 61000-3-2, (EN60555-2)
Voltage fluctuations and flicker
IEC/EN 61000-3-3, (EN60555-3)
Electrostatic Discharge Immunity
IEC 61000-4-2
Standards
RF, Electromagnetic Field Immunity
IEC 61000-4-3
Electrical Fast Transient/Burst Immunity
IEC 61000-4-4
Surge Immunity
IEC 61000-4-5
RF, Conducted Disturbance Immunity
IEC 61000-4-6
Power frequency Magnetic Field Immunity
IEC 61000-4-8
Voltage dips, Short Interruptions Immunity
IEC 61000-4-11
www.aimtec.com
F 052.1e R3.E
Tel: [phone]
2 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only