AMEOR60-AZ Datasheet, PDF (2/11 Pages) AIMTEC – up to 5A | AC-DC LED driver

General Specifications (continued)
Parameters
Conditions
Over voltage protection
Short circuit protection
Short circuit restart
Over temperature protection
Operating temperature
With derating over 60°C
Maximum case temperature
Storage temperature
Temperature coefficient
Cooling
Humidity
Wires
Weight
Dimensions (L X H X W)
MTBF
Series AMEOR60-AZ
up to 5A | AC-DC LED driver
Typical
110% of Vout
Continuous
Auto recovery
>105°C
-40 to +80
-40 to +95
±0.02
Free air convection
UL1015 18AWG * 20CM
220
5.83 x 1.97 x 1.3 inches 148 x 50 x 33 mm
>400,000 hrs (MIL-HDBK-217F at +25°C)
Maximum Units
o_C
100
o_C
o_C
% / ^oC
95
% RH
g
Environment Approval
Test
Parameters
Wave form
Acceleration amplitude
Shock
Bump duration
Converter operation
Number of bumps
Test mode
Vibration
Displacement
Acceleration
Converter operation
Conditions
Half sine wave
5gn
30 ms
Before and after test, body mounted (on chassis)
18 (3 in each direction for every axis)
Sweep sine, 10-100Hz, speed 0.05Hz/s
1 mm
3g, 3 loops 30min one cycle, 3h total, every axis tested
Before and after test, body mounted (on chassis)
Dimensions
Top View
139.00
(5.47)
148.00
(5.83)
4 Mounting Holes-M3
4.50
(0.18)
200.00
(8.00)
200.00
(8.00)
Side View
Input/Output Wires are 18 AWG 20cm
NOTE: to adjust the output current connect a 20K Ohm pot between blue and white wire
www.aimtec.com
F 052.1e R3.A
Tel: [phone]
2 of 11
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only