AMEL5-AZ Datasheet, PDF (2/3 Pages) AIMTEC – 5 Watt | AC-DC Converter

Preliminary
Series AMEL5-AZ
5 Watt | AC-DC Converter
General Specifications
Parameters
Conditions
Typical
Maximum
Units
Switching frequency
66
KHz
Over Load protection
Auto recovery, Fold back
>116%
Over voltage protection
Zener diode clamp
Short circuit protection
Operating temperature
Storage temperature
Maximum Case temperature
Temperature coefficient
With derating above 50ºC
Auto recovery
Refer to the models table above
-40 to +95
100
0.02
o_C
o_C
o_C
% / ^oC
Humidity
Non condensing
20 ~ 95
% RH
Case material
Plastic resin + Fiberglass (flammability to UL 94V-0)
Weight
30
g
Dimensions (L x W x H)
MTBF
2.03 x 1.10 x 0.70 inches 51.5 x 28 x 17.8mm
> 400 000 hrs (MIL-HDBK -217F, t=+25^oC)
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified.
Environment Approval
Parameters
Wave form: Half sine wave
Conditions
Acceleration amplitude: 5gn
Shock
Bump duration: 30 ms
Number of bumps: 18 (3 in each direction for every axis)
Converter operation before and after test, body mounted (on chassis)
Test mode: Sweep sine
10-100Hz, speed 0.05Hz/s
Vibrations
Displacement: 1mm
Acceleration: 3g
3 loops 30min one cycle, 3h total, every axis tested
Converter operation before and after test, body mounted (on chassis)
Safety Specifications
Parameters
Agency approvals
cULus, CE, CB pending
Medical Electrical Equipment
Information technology Equipment
EMI - Conducted and radiated emission
Electrostatic Discharge Immunity
Standards
RF, Electromagnetic Field Immunity
Electrical Fast Transient/Burst Immunity
Surge Immunity
RF, Conducted Disturbance Immunity
Power frequency Magnetic Field Immunity
Voltage dips, Short Interruptions Immunity
IEC\EN\UL 60950-1
EN 60950-1:2006+A11:2009
EN55022, class B
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
Pin Out Specifications
www.aimtec.com
F 052e R8
Tel: [phone]
2 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only