AM1PS-NZ Datasheet, PDF (2/3 Pages) AIMTEC – 1 Watt | DC-DC Converter

Series AM1PS-NZ
1 Watt | DC-DC Converter
Output Specifications
Parameters
Voltage accuracy
Short Circuit protection
Line voltage regulation
Load voltage regulation
Temperature coefficient
Ripple & Noise
Conditions
See tolerance graph
For 1.0% Vin, 3.3V Model
For 1.0% Vin, Other Model
Load 10 – 100%
At 20 MHz Bandwidth
Typical
Maximum
Units
±5
%
Continuous with automatic recovery ‡
±1.5
±1.2
% of Vin
12
%
±0.03
%/^oC
60
m Vp-p
General Specifications
Parameters
Conditions
Typical
Maximum
Units
Switching frequency
100% load
100 - 300
KHz
Operating temperature
Derating above 85^oC
-40 to +105
o_C
Storage temperature
-55 to +125
o_C
Maximum case temperature
125
o_C
Cooling
Free air convection
Humidity
Non condensing
95
%
Case material
Plastic UL94-VO
Lead Soldering Temperature
1.5mm from Lead, 10 sec max.
300
o_C
Weight
1.8
g
Dimensions (L x W x H)
0.50 x 0.39 x 0.32 inches 12.70 x 10.00 x 8.20 mm
MTBF
>3500K hrs(MIL-HDBK -217F, Ground Benign, t=+25^oC)
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified.
Safety Specifications
Parameters
Agency approvals cULus (without 3.3 input and output models)
Standards
UL 60950-1
Pin Out Specifications
Pin
1
4
5
6
7
8
Single
- V Input
+V Input
+V Output
No pin
-V Output
No pin
Dimensions
www.aimtec.com
F 051e R11.B
Tel: [phone]
2 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only