AM15TW-Z_13 Datasheet, PDF (2/3 Pages) AIMTEC – 15 Watt | DC-DC Converter

Isolation Specifications
Parameters
Tested I/O voltage
Tested Case/Input and Output
Resistance
Capacitance
Output Specifications
Parameters
Voltage accuracy
Voltage balance
Line voltage regulation
Load voltage regulation (Single)
Load voltage regulation (Dual)
Over voltage protection
Over current protection
Short Circuit protection
Short circuit restart
Ripple & Noise
General Specifications
Parameters
Switching frequency
Operating temperature
Storage temperature
Max Case temperature
Derating
Cooling
Humidity
Case material
Weight
Dimensions (L x W x H)
MTBF
Safety Specifications
Parameters
Agency Approval
Standards
Conditions
3 sec
Typical
1600
>1000
2000
Series AM15TW-Z
15 Watt | DC-DC Converter
Rated
1600
Units
VDC
VDC
MOhm
pF
Conditions
Dual output
HL-LL
0% Load to Full Load
0% Load to Full Load
Full Load
Typical
±1
±5
±0.2
±0.5
±1.0
Zener diode clamp
150
Continuous
Auto recovery
60
Maximum
Units
%
%
%
%
%
%
m Vp-p
Conditions
Typical
Maximum
Units
100% load
330
KHz
Full Load with derating above 60ºC
-40 to +85
o_C
-40 to +125
o_C
105
o_C
Above 60ºC
2.5 % per 1ºC
Free air convection
95
% RH
Nickel-coated Copper
20.0
g
Tolerance ±0.5 mm or ±0.02 inches
1.25 x 0.8 x 0.40 inches 31.75 x 20.32 x 10.16 mm
> 410 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25^oC)
CE
EN55022 Class A
IEC61000-4-2, Perf. Criteria A
IEC61000-4-3, Perf. Criteria A
IEC61000-4-4, Perf. Criteria B (requires 2 external cap 330uF/100V or 1 cap 680 uF/100V for
parallel connection)
IEC61000-4-5, Perf. Criteria B (requires 2 external cap 330uF/100V or 1 cap 680 uF/100V for
parallel connection)
IEC61000-4-6, Perf. Criteria A
IEC61000-4-8, Perf. Criteria A
Note: also meets IEC 60950-1:2001
www.aimtec.com
F 051e R12.C
Tel: [phone]
2 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only